Porcelain Tile / September 14, 2018 / Brousseau
Attach the appropriate diamond core bit to the electric drill and ensure that there is a constant supply of cold water that is being directly aimed at the diamond core i.e. by using water cooling equipment. Note regarding water cooling. It is important to ensure that there is a constant supply of cold water directed at the drill bit in order to keep the diamond core cool and to help remove any debris that may have built up whilst drilling the tile. It is not advisable to try and cool the diamond drill bit by using a hand held aspirator or drilling through a wet sponge.
Ensure that scrap tiles or another similar material is placed under the tile that is being drilled. This will help to halt the progress of the drill once it has finished drilling through the tile. Before drilling tile ensure that you are wearing the correct safety equipment including safety glasses or goggles. Ensure that you are using a residual current device (RCD) to help prevent electric shock. Drilling Small Diameter Holes (10mm or Smaller) with Diamond Cores. Mark the center of the hole to be drilled into the tile by using a marker or a sticky drive pad.
When it comes to deciding which tile to use in your home most people waver between choosing porcelain tile or a ceramic white tile. Certainly both have great qualities bringing beauty and charm into the space you are living in. Good quality tile adds an elegant tastefulness to a room as well as providing flooring that can stand up to more use than wood or carpet. This is why its so important to make sure youre choosing the right kind of tile. Everyone loves the clean bright look of white tile so its little wonder that people wonder if they should use ceramic or porcelain tile. A lot of DIY tile installers ask the difference between the two and the answer is surprising. Despite a superficial similarity differences abound between the two types of tile.