Porcelain Tile / August 22, 2018 / Brousseau
Attach the appropriate diamond core bit to the electric drill and ensure that there is a constant supply of cold water that is being directly aimed at the diamond core i.e. by using water cooling equipment. Note regarding water cooling. It is important to ensure that there is a constant supply of cold water directed at the drill bit in order to keep the diamond core cool and to help remove any debris that may have built up whilst drilling the tile. It is not advisable to try and cool the diamond drill bit by using a hand held aspirator or drilling through a wet sponge.
Simply start the drill in a vertical position and the sticky pad will ensure that the drill does not slip. Once you have finished drilling the tile simply peel off the sticky drive pad. Because the majority of small diameter holes will be cut into tiles already fixed to the wall it will be necessary to drill a fixing hole behind the tile. Replace the diamond core with the appropriately sized masonry drill bit and set the drill to hammer mode. Use a slow speed for drilling into hard materials to ensure that the tip doesnt overheat. Ensure that the drill bit is frequently withdrawn in order to stop a build up of dust.
The installation of porcelain tile is becoming an increasingly regular task for the modern day tiler. Customers desire the look of natural stone but require the extra durability that porcelain tiles offer. With porcelain tiles being non-porous (impervious to water) and virtually maintenance free they are the perfect solution for the progressively popular wet-room styled bathrooms. Your ceramic white tile will look lovely at first but it wont be long before day-to-day dirt gets ingrained and its permanently dingy.