Porcelain Tile / September 14, 2018 / Brousseau
To choose the right tiles that would best fit your needs it is important not to get lost with such terms as ceramic tiles non-porcelain or ceramic porcelain. All of these terms refer to a kind of ceramic ware however they differ in characteristics application and production method. Ceramic tiles are usually referred to as non-porcelain tiles and they are easier to cut and have higher water absorption as compared to porcelain. Unlike porcelain tiles ceramic tiles cannot absorb heavy impact or heavy foot traffic as they have a tendency to chip and abrade.
These methods will not keep the drill bits cool enough and will drastically shorten the life of the drill bit. Ensure that the drill is in normal mode and set the drill to between 1000 and 1500 rpm. If you have marked the tile with a marker it is best to drill into the tile using a method called leaning in. Leaning in ensures that the drill will not slip and wander off center as you begin to drill into the tile.
This ruggedness is why tiles made of porcelain are the ones most often found in floor applications for outdoor living spaces its because they are far better at handling harsh conditions. Tiles made of porcelain are practically a must for outdoor patios in cold weather climates because unlike normal ceramic tiles they are far less likely to crack. Not only can they endure the elements better but the unique absorption rate and density of means that moisture and dirt have a hard time getting through the surface. That means that the tiles look cleaner and retain their color for a longer period of time.