Porcelain Tile / September 3, 2018 / Brousseau
There can be many quality issues regarding porcelain tiles that are sold at home improvement stores and discount tile stores. Many times these tiles are cheap imports that are vastly inferior with many quality control issues. Unwitting people thinking they are purchasing quality tiles that are superior to ceramic when in fact they are extremely cheap. These cheap tiles can present many problems in quality durability and they can be extremely difficult to clean and maintain.
With porcelain being one of the most popular choices of tile material available and with the trend for porcelain tile set to continue tilers have had to adapt their working methods and tools to be able to cater for the demands of their clients. Until recently a large number of tile fixers have shied away from the installation and drilling of porcelain tiles due its perceived difficulty. However drilling holes in porcelain tile is not difficult! Using the correct methods and the best tools for the job it is possible to achieve perfect cuts in a matter of seconds.
It is not advisable to try and cool the drill bit by using an aspirator or drilling through a wet sponge these methods will not keep the drill bit cool enough and the drill bit will burn out. Set the electric drill to between 700 and 900 rpm. Make sure that the drill is in normal mode. Push the carbide drill bit gently into where you have marked the tile until you hear a cracking sound. Start drilling from a vertical position with sufficient pressure and dont stop until you hear a change in the tone of the drill. As soon as you hear the change in the tone begin to ease off.