Porcelain Tile / August 27, 2018 / Brousseau.
The Porcelain Enamel Institute (PEI) rating system is also a good reference when buying your porcelain tiles. In the rating system the tiles are measured according to their application. The range starts from PEI Class 1 up to PEI Class 5. When looking for the perfect porcelain tile designs for your home you can choose from a variety of designs that are glazed unglazed or through-bodied in color composition. Whatever your preference porcelain tiles are guaranteed to make your home cozy and beautiful.
Are you building your new home? Or are have you grown tired of your marble flooring or the chip on your wall paper or the drab of your wooden panels? It is time to switch or consider porcelain tiles. These tiles not only brighten up your home they are durable and almost maintenance free. You can choose from the wide selection of perfect porcelain tile designs for your home.
To choose the right tiles that would best fit your needs it is important not to get lost with such terms as ceramic tiles non-porcelain or ceramic porcelain. All of these terms refer to a kind of ceramic ware however they differ in characteristics application and production method. Ceramic tiles are usually referred to as non-porcelain tiles and they are easier to cut and have higher water absorption as compared to porcelain. Unlike porcelain tiles ceramic tiles cannot absorb heavy impact or heavy foot traffic as they have a tendency to chip and abrade.
Drilling Large Diameter Holes (13mm or Larger). In order to cut holes that are 13mm or larger in diameter it is necessary to first drill a pilot hole. The pilot hole will act as a locater for a large diamond core and will help you to drill a perfect hole in porcelain tile. Attach an 8mm carbide drill bit or 8mm diamond bit to your drill. Follow the instructions given above for either Drilling Small Diameter Holes (10mm or Smaller) with Diamond Cores or Drilling Small Diameter Holes (10mm or Smaller) with Carbide Bits depending on whether you are using diamond cores or carbide drill bits. Leave out the final step in either case as you wont be drilling a fixing hole behind the tile.