Porcelain Tile / September 10, 2018 / Brousseau
As mentioned most people find the look of clean white tile to be universally appealing. It adds a brightness to a living space giving it the appearance of being more open and welcoming. This is where porcelain tiles have the advantage of the more common ceramic white tiles. Porcelain is sleek clean and beautiful and the difference in appearance is noticeable. In fact they dont just look cleaner; due to their density and hardness porcelain materials (tiles) are more impervious to dirt and are much easier to clean.
Glazed porcelain tiles are ideal for the perfect flooring in your home. There are many differences between porcelain tiles and ceramic tiles for use on your floors or walls. Ceramic tiles are made from red or white clay and are fired then finished with a glaze that helps the pattern and colours to be sustained. These are normally easy to cut due to softer materials and have a PEI 0-3 rating. Porcelain tiles are made by dust pressed methods from porcelain clay that creates a fine grain and smooth face.
Simply start the drill in a vertical position and the sticky pad will ensure that the drill does not slip. Once you have finished drilling the tile simply peel off the sticky drive pad. Because the majority of small diameter holes will be cut into tiles already fixed to the wall it will be necessary to drill a fixing hole behind the tile. Replace the diamond core with the appropriately sized masonry drill bit and set the drill to hammer mode. Use a slow speed for drilling into hard materials to ensure that the tip doesnt overheat. Ensure that the drill bit is frequently withdrawn in order to stop a build up of dust.