Porcelain Tile / September 13, 2018 / Brousseau
How to lean in... To lean in simply start the drill at an angle as soon as the drill bit has started to cut the tile slowly bring the drill into a vertical position. Ensure that sufficient pressure is being applied (tile dust should be evident in cooling water) and rotate slowly until you have cut the perfect hole. As you finish the hole you will notice that the tone of the drill will change. Using sticky drive pads. If you use a sticky drive pad it is unnecessary to use the leaning in method.
The Armeg PTC Diamond drill bit range boasts diamond core drill bits that are capable of cutting hundreds of holes in all grades of porcelain. They feature thin wall continuous diamond crowns for and fast and efficient cutting and an extended life. These diamond cores are not to be confused with short-life diamond grit alternatives. Not only do these diamond drill bits cut porcelain they also cut materials such as marble granite travertine slate quarry tiles ceramic tiles natural stone and limestone.
Porcelain comes in many shapes sizes and beautiful designs. All of these characteristics seem to make porcelain the clear choice when it comes to quality durability and easy of cleaning and maintenance. In reality the truth can be vastly different. The specifications regarding porcelain tiles are never verified or tested so any manufacturer can claim that their tiles are porcelain. Tile manufacturers can claim that they are manufacturing porcelain tiles without having them tested. In many cases tiles labeled as porcelain do not have the characteristics that make them quality tiles.