Porcelain Tile / September 13, 2018 / Brousseau
For your walls or ceiling the PEI Class 1 porcelain tiles are recommended because they are not subjected to any kind of weight. The PEI Class 2 may be used as bathroom floor tiles where the weight exposure is minimal while the PEI Classes 3 and 4 are ideal as table top or kitchen top and as flooring in any part of your home. The PEI Class 5 is highly recommended for residential or commercial use where there is heavy foot traffic. Porcelain tiles are all weather tiles that can withstand heat exposure during the summer and the freezing temperatures during winter.
Application of tiles are rated according to the Porcelain Enamel Institute (PEI) rating system from PEI Class 1 up to PEI Class 5. If you are looking for the right tiles to be used for your walls or ceiling the PEI Class 1 is recommended because the tiles are not exposed to any impact. You can choose the PEI Classes 2 and 3 for your bathroom tiles and the PEI Classes 3 to 5 as kitchen and tabletops and as flooring in any part of your home or building according to the impact foot traffic or exposure of the area where you will install your porcelain tiles.
Simply start the drill in a vertical position and the sticky pad will ensure that the drill does not slip. Once you have finished drilling the tile simply peel off the sticky drive pad. Because the majority of small diameter holes will be cut into tiles already fixed to the wall it will be necessary to drill a fixing hole behind the tile. Replace the diamond core with the appropriately sized masonry drill bit and set the drill to hammer mode. Use a slow speed for drilling into hard materials to ensure that the tip doesnt overheat. Ensure that the drill bit is frequently withdrawn in order to stop a build up of dust.