Porcelain Tile / September 13, 2018 / Brousseau
When the shipment arrives they can look vastly different from the ones that were originally ordered. Often the colors and textures can look different from the sample. Other times there may be surface scratches or other imperfections that make them look ugly. Once the shipment arrives at your door it can be extremely difficult to return them and ship them back. Other times the quality control issues are not noticed until the tiles are installed and then the manufacturer will never accept returns on already installed tiles no mater what types of problems they have.
The Armeg PTC Diamond drill bit range boasts diamond core drill bits that are capable of cutting hundreds of holes in all grades of porcelain. They feature thin wall continuous diamond crowns for and fast and efficient cutting and an extended life. These diamond cores are not to be confused with short-life diamond grit alternatives. Not only do these diamond drill bits cut porcelain they also cut materials such as marble granite travertine slate quarry tiles ceramic tiles natural stone and limestone.
Because the majority of small diameter holes will be cut into tiles already fixed to the wall it will be necessary to drill a fixing hole behind the tile. Replace the carbide drill bit with the appropriately sized masonry drill bit and set the drill to hammer mode. Use a slow speed for drilling into hard materials to ensure that the tip doesnt overheat. Ensure that the drill bit is frequently withdrawn in order to stop a build up of dust.