Porcelain Tile / August 29, 2018 / Brousseau
Attach the appropriate diamond core bit to the electric drill and ensure that there is a constant supply of cold water that is being directly aimed at the diamond core i.e. by using water cooling equipment. Note regarding water cooling. It is important to ensure that there is a constant supply of cold water directed at the drill bit in order to keep the diamond core cool and to help remove any debris that may have built up whilst drilling the tile. It is not advisable to try and cool the diamond drill bit by using a hand held aspirator or drilling through a wet sponge.
Identifying the Size of Hole to be Drilled. The first step is to correctly identify the size of hole to be drilled. This is very important as the diameter of the hole to be cut dictates the method that you will use to drill into the tile. The majority of holes that are 10mm and under in diameter will be drilled with the tile already fixed to the wall. Conversely the majority of holes over 10mm in diameter will be drilled into the tile before the tile has been fixed. When drilling holes that are 13mm or larger in diameter make sure that the tile to be drilled is placed in a tray that will collect the waste water that is produced.
The term porcelain was coined from the Italian word porcellana because of its translucent characteristic similar to the cowrie shell. Porcelain was first developed in China and was exported to Europe between the 17th and 18th century. Beautiful jars and other delicate ornaments were made from porcelain but the discovery of its base material from soft paste to hard past has made porcelain an important industrial commodity. Porcelain is resistant to high temperatures resistant to abrasions and is also non-porous which allows very minimal water absorption. Today porcelain is an important material for insulation and is popularly used for dental prosthesis and veneers. That is why porcelain tiles are excellent choices for residential and commercial finishing.