Porcelain Tile / September 1, 2018 / Brousseau.
Porcelain tiles may be classified into natural glazed and polished tiles. The natural porcelain tile normally does not undergo any further finish after it is exposed to high temperature. This type of tile may be referred to as unglazed or through body tile where the colour goes all the way through. The glazed tile is coated with liquid glass that allows the manufacturer to put in a variety of designs and play around with colours. It comes out glossy and is one of the easiest to maintain. They are highly recommended as walls or accents in bathrooms and kitchen.
There can be many quality issues regarding porcelain tiles that are sold at home improvement stores and discount tile stores. Many times these tiles are cheap imports that are vastly inferior with many quality control issues. Unwitting people thinking they are purchasing quality tiles that are superior to ceramic when in fact they are extremely cheap. These cheap tiles can present many problems in quality durability and they can be extremely difficult to clean and maintain.
Because the majority of small diameter holes will be cut into tiles already fixed to the wall it will be necessary to drill a fixing hole behind the tile. Replace the carbide drill bit with the appropriately sized masonry drill bit and set the drill to hammer mode. Use a slow speed for drilling into hard materials to ensure that the tip doesnt overheat. Ensure that the drill bit is frequently withdrawn in order to stop a build up of dust.
Recommended Equipment for Drilling Porcelain Tile. High quality diamond core drill bits. Carbide pilot drill bit - only required if youre drilling large diameter holes (13mm or larger) and dont have a suitable-sized (8mm) diamond drill bit. Masonry drill bits - included with quality tile drill bits. Water cooling equipment. Electric drill Clear safety glasses / goggles.