Porcelain Tile / September 1, 2018 / Brousseau
There was a time in the past when porcelain was synonymous with decorative pieces such as vases chinaware figurines and the like. The misconception that porcelain was fragile or delicate was common. However the many uses of porcelain have grown through time and it continues to be a valuable material in the dental profession for dental prosthesis and dental veneers. Today porcelain is a major industrial material used in insulation because porcelain is highly resistant to heat resistant to abrasion and is non-porous. That is why porcelain makes excellent floor tiles for both residential and commercial use.
Because the majority of small diameter holes will be cut into tiles already fixed to the wall it will be necessary to drill a fixing hole behind the tile. Replace the carbide drill bit with the appropriately sized masonry drill bit and set the drill to hammer mode. Use a slow speed for drilling into hard materials to ensure that the tip doesnt overheat. Ensure that the drill bit is frequently withdrawn in order to stop a build up of dust.
Ensure that scrap tiles or another similar material is placed under the tile that is being drilled. This will help to halt the progress of the drill once it has finished drilling through the tile. Before drilling tile ensure that you are wearing the correct safety equipment including safety glasses or goggles. Ensure that you are using a residual current device (RCD) to help prevent electric shock. Drilling Small Diameter Holes (10mm or Smaller) with Diamond Cores. Mark the center of the hole to be drilled into the tile by using a marker or a sticky drive pad.