Porcelain Tile / September 7, 2018 / Brousseau
How to lean in... To lean in simply start the drill at an angle as soon as the drill bit has started to cut the tile slowly bring the drill into a vertical position. Ensure that sufficient pressure is being applied (tile dust should be evident in cooling water) and rotate slowly until you have cut the perfect hole. As you finish the hole you will notice that the tone of the drill will change. Using sticky drive pads. If you use a sticky drive pad it is unnecessary to use the leaning in method.
With all of the advantages of porcelain tiling you might be wondering why some people choose ceramic tile at all. The reason has up to now been simple: Porcelain tiles are slightly more expensive. However not all costs are found on a price tag. When you really look at the overall expenses taking into account the fact that porcelain tiles are less likely to be scratched chipped or cracked that their colors stay bright that theyre easy to clean and more safe for your family it seems clear that in the long run porcelain tiles are well worth the price.
To choose the right tiles that would best fit your needs it is important not to get lost with such terms as ceramic tiles non-porcelain or ceramic porcelain. All of these terms refer to a kind of ceramic ware however they differ in characteristics application and production method. Ceramic tiles are usually referred to as non-porcelain tiles and they are easier to cut and have higher water absorption as compared to porcelain. Unlike porcelain tiles ceramic tiles cannot absorb heavy impact or heavy foot traffic as they have a tendency to chip and abrade.