Porcelain Tile / September 3, 2018 / Brousseau
The Armeg PTC Carbide drill bit range comprises of excellent porcelain tile drill bits that are capable of cutting 15-25 holes in grade 5 porcelain or 50+ in lesser grades of porcelain. These carbide drill bits boast non-slip start-up thanks to diamond-ground tip geometry. The Armeg PTC Soft Tile drill bit range is ideal for drilling softer tiles such as ceramics and travertine. They feature point-ground tips to help reduce slippage and wander. Armeg Tile Drilling Accessories for use with Armeg PTC drill bits include: water feed pump kit water feed adapters water feed clamp & drive/piloting guides to ensure non-slip start-up with small diameter diamond cores.
Unglazed tiles do not have a coated surface and full body porcelain tiles dont show wear anyhow due to the colour and design being throughout the entire tile. These types of tiles have a PEI rating of 0-5 meaning they can be used in any area. PEI classes are 0 through 5. The porcelain enamel institute scale is one that is used to help detect areas that tiles should be used in. The glazed tiles that have the overall 0 to 5 rating can be used anywhere from no foot traffic to industrial traffic making them ideal for use in your home.
The polished porcelain on the other hand goes through a more refined process and comes out looking almost like a granite finish or has a glossy effect without the glaze. In choosing the perfect ceramic porcelain tiles for your finishing you must know the colour combination or contrast in the areas where you will install the tiles and the kind of exposure the tiles may be subjected to. You may discuss these with your architect or interior designer or you may refer to our website and get in touch with us so we can assist you the best way we can.