Porcelain Tile / September 14, 2018 / Brousseau
When the shipment arrives they can look vastly different from the ones that were originally ordered. Often the colors and textures can look different from the sample. Other times there may be surface scratches or other imperfections that make them look ugly. Once the shipment arrives at your door it can be extremely difficult to return them and ship them back. Other times the quality control issues are not noticed until the tiles are installed and then the manufacturer will never accept returns on already installed tiles no mater what types of problems they have.
Because the majority of small diameter holes will be cut into tiles already fixed to the wall it will be necessary to drill a fixing hole behind the tile. Replace the carbide drill bit with the appropriately sized masonry drill bit and set the drill to hammer mode. Use a slow speed for drilling into hard materials to ensure that the tip doesnt overheat. Ensure that the drill bit is frequently withdrawn in order to stop a build up of dust.
Unglazed tiles do not have a coated surface and full body porcelain tiles dont show wear anyhow due to the colour and design being throughout the entire tile. These types of tiles have a PEI rating of 0-5 meaning they can be used in any area. PEI classes are 0 through 5. The porcelain enamel institute scale is one that is used to help detect areas that tiles should be used in. The glazed tiles that have the overall 0 to 5 rating can be used anywhere from no foot traffic to industrial traffic making them ideal for use in your home.