Porcelain Tile / September 13, 2018 / Brousseau
For your walls or ceiling the PEI Class 1 porcelain tiles are recommended because they are not subjected to any kind of weight. The PEI Class 2 may be used as bathroom floor tiles where the weight exposure is minimal while the PEI Classes 3 and 4 are ideal as table top or kitchen top and as flooring in any part of your home. The PEI Class 5 is highly recommended for residential or commercial use where there is heavy foot traffic. Porcelain tiles are all weather tiles that can withstand heat exposure during the summer and the freezing temperatures during winter.
Cheap porcelain tiles can be difficult to properly install. Cheap tiles may look nice on the surface but they may not be able to be cut cleanly with a tile saw and may chip on the edges. Also if the tiles are porous then it will be difficult to clean up the excess grout. Grout haze can become embedded in the tiles and make them look vastly different after they are installed compared to what they looked like before they were installed. Cheap tiles can have quality control issues. Many times people choose their sample tile and then order them.
Simply start the drill in a vertical position and the sticky pad will ensure that the drill does not slip. Once you have finished drilling the tile simply peel off the sticky drive pad. Because the majority of small diameter holes will be cut into tiles already fixed to the wall it will be necessary to drill a fixing hole behind the tile. Replace the diamond core with the appropriately sized masonry drill bit and set the drill to hammer mode. Use a slow speed for drilling into hard materials to ensure that the tip doesnt overheat. Ensure that the drill bit is frequently withdrawn in order to stop a build up of dust.