Porcelain Tile / September 13, 2018 / Brousseau
Attach the appropriate diamond core bit to the electric drill and ensure that there is a constant supply of cold water that is being directly aimed at the diamond core i.e. by using water cooling equipment. Note regarding water cooling. It is important to ensure that there is a constant supply of cold water directed at the drill bit in order to keep the diamond core cool and to help remove any debris that may have built up whilst drilling the tile. It is not advisable to try and cool the diamond drill bit by using a hand held aspirator or drilling through a wet sponge.
Identifying the Size of Hole to be Drilled. The first step is to correctly identify the size of hole to be drilled. This is very important as the diameter of the hole to be cut dictates the method that you will use to drill into the tile. The majority of holes that are 10mm and under in diameter will be drilled with the tile already fixed to the wall. Conversely the majority of holes over 10mm in diameter will be drilled into the tile before the tile has been fixed. When drilling holes that are 13mm or larger in diameter make sure that the tile to be drilled is placed in a tray that will collect the waste water that is produced.
For the easiest to clean and maintain floors ceramic and porcelain tiles seem to make the most sense. In theory the specifications regarding porcelain tiles make them vastly superior to ceramic tile. The specifications state that porcelain tiles are harder and more scratch resistant than ceramic. Porcelain is supposed to be denser and less porous then ceramic. Many people like the idea that some porcelain tiles are through body where the entire porcelain tile is the exact same color and texture as the surface.