Porcelain Tile / August 21, 2018 / Brousseau
How to lean in... To lean in simply start the drill at an angle as soon as the drill bit has started to cut the tile slowly bring the drill into a vertical position. Ensure that sufficient pressure is being applied (tile dust should be evident in cooling water) and rotate slowly until you have cut the perfect hole. As you finish the hole you will notice that the tone of the drill will change. Using sticky drive pads. If you use a sticky drive pad it is unnecessary to use the leaning in method.
There are many different types of tiles on the market today. Most people want the best possible type of tile floor they can afford and they also want it to look beautiful and last for many years. There are also cleaning and maintenance issues that must be considered when choosing tile flooring. Many people desire the natural beauty of stone and are willing to deal with the increased cleaning and maintenance issues that come with stone. Other people like the uniform look of ceramic and porcelain and they do not want to deal with some of the hassles involved with stone tile floors.
Glazed porcelain tiles are ideal for the perfect flooring in your home. There are many differences between porcelain tiles and ceramic tiles for use on your floors or walls. Ceramic tiles are made from red or white clay and are fired then finished with a glaze that helps the pattern and colours to be sustained. These are normally easy to cut due to softer materials and have a PEI 0-3 rating. Porcelain tiles are made by dust pressed methods from porcelain clay that creates a fine grain and smooth face.