Porcelain Tile / August 29, 2018 / Brousseau
Simply start the drill in a vertical position and the sticky pad will ensure that the drill does not slip. Once you have finished drilling the tile simply peel off the sticky drive pad. Because the majority of small diameter holes will be cut into tiles already fixed to the wall it will be necessary to drill a fixing hole behind the tile. Replace the diamond core with the appropriately sized masonry drill bit and set the drill to hammer mode. Use a slow speed for drilling into hard materials to ensure that the tip doesnt overheat. Ensure that the drill bit is frequently withdrawn in order to stop a build up of dust.
The Armeg PTC Diamond drill bit range boasts diamond core drill bits that are capable of cutting hundreds of holes in all grades of porcelain. They feature thin wall continuous diamond crowns for and fast and efficient cutting and an extended life. These diamond cores are not to be confused with short-life diamond grit alternatives. Not only do these diamond drill bits cut porcelain they also cut materials such as marble granite travertine slate quarry tiles ceramic tiles natural stone and limestone.
Glazed porcelain can be found through many online retailers for varying costs. Here are a few different types of glazed porcelain that can be used in any area of the home. The Wood Grain Collection made by Takla offers your floors the hard wood appearance with the protection of glazed porcelain. These tiles have a water absorption rate of less than 0.05% and are first grade quality porcelain. The thickness of the average tile of this type is 3/8 inch and the finish is matter and slightly embossed to have the appearance of wood grain. The PEI rating for these tiles is 4 and they are considered a green building material.