Porcelain Tile / September 13, 2018 / Brousseau
When it comes to deciding which tile to use in your home most people waver between choosing porcelain tile or a ceramic white tile. Certainly both have great qualities bringing beauty and charm into the space you are living in. Good quality tile adds an elegant tastefulness to a room as well as providing flooring that can stand up to more use than wood or carpet. This is why its so important to make sure youre choosing the right kind of tile. Everyone loves the clean bright look of white tile so its little wonder that people wonder if they should use ceramic or porcelain tile. A lot of DIY tile installers ask the difference between the two and the answer is surprising. Despite a superficial similarity differences abound between the two types of tile.
It is not advisable to try and cool the drill bit by using an aspirator or drilling through a wet sponge these methods will not keep the drill bit cool enough and the drill bit will burn out. Set the electric drill to between 700 and 900 rpm. Make sure that the drill is in normal mode. Push the carbide drill bit gently into where you have marked the tile until you hear a cracking sound. Start drilling from a vertical position with sufficient pressure and dont stop until you hear a change in the tone of the drill. As soon as you hear the change in the tone begin to ease off.
Cheap porcelain tiles can be difficult to properly install. Cheap tiles may look nice on the surface but they may not be able to be cut cleanly with a tile saw and may chip on the edges. Also if the tiles are porous then it will be difficult to clean up the excess grout. Grout haze can become embedded in the tiles and make them look vastly different after they are installed compared to what they looked like before they were installed. Cheap tiles can have quality control issues. Many times people choose their sample tile and then order them.