Porcelain Tile / September 14, 2018 / Brousseau
Attach the appropriate diamond core bit to the electric drill and ensure that there is a constant supply of cold water that is being directly aimed at the diamond core i.e. by using water cooling equipment. Note regarding water cooling. It is important to ensure that there is a constant supply of cold water directed at the drill bit in order to keep the diamond core cool and to help remove any debris that may have built up whilst drilling the tile. It is not advisable to try and cool the diamond drill bit by using a hand held aspirator or drilling through a wet sponge.
These methods will not keep the drill bits cool enough and will drastically shorten the life of the drill bit. Ensure that the drill is in normal mode and set the drill to between 1000 and 1500 rpm. If you have marked the tile with a marker it is best to drill into the tile using a method called leaning in. Leaning in ensures that the drill will not slip and wander off center as you begin to drill into the tile.
The installation of porcelain tile is becoming an increasingly regular task for the modern day tiler. Customers desire the look of natural stone but require the extra durability that porcelain tiles offer. With porcelain tiles being non-porous (impervious to water) and virtually maintenance free they are the perfect solution for the progressively popular wet-room styled bathrooms. Your ceramic white tile will look lovely at first but it wont be long before day-to-day dirt gets ingrained and its permanently dingy.