Porcelain Tile / September 14, 2018 / Brousseau
With porcelain being one of the most popular choices of tile material available and with the trend for porcelain tile set to continue tilers have had to adapt their working methods and tools to be able to cater for the demands of their clients. Until recently a large number of tile fixers have shied away from the installation and drilling of porcelain tiles due its perceived difficulty. However drilling holes in porcelain tile is not difficult! Using the correct methods and the best tools for the job it is possible to achieve perfect cuts in a matter of seconds.
Cheap porcelain tiles can be difficult to properly install. Cheap tiles may look nice on the surface but they may not be able to be cut cleanly with a tile saw and may chip on the edges. Also if the tiles are porous then it will be difficult to clean up the excess grout. Grout haze can become embedded in the tiles and make them look vastly different after they are installed compared to what they looked like before they were installed. Cheap tiles can have quality control issues. Many times people choose their sample tile and then order them.
Unglazed tiles do not have a coated surface and full body porcelain tiles dont show wear anyhow due to the colour and design being throughout the entire tile. These types of tiles have a PEI rating of 0-5 meaning they can be used in any area. PEI classes are 0 through 5. The porcelain enamel institute scale is one that is used to help detect areas that tiles should be used in. The glazed tiles that have the overall 0 to 5 rating can be used anywhere from no foot traffic to industrial traffic making them ideal for use in your home.