Porcelain Tile / August 19, 2018 / Brousseau
Now that the pilot hole has been cut it is possible to drill the main (large) hole. Attach the appropriate diamond core and ensure that there is a constant supply of cold water (see water cooling information in the previous sections of this article). Diamond cores that are larger than 13mm will require an adapter with pilot pin that locates into the pilot hole that has been cut previously to ensure the perfect hole will be made. Starting the drill vertically begin to drill in a circular motion with sufficient pressure until the tone of the drill changes.
This ruggedness is why tiles made of porcelain are the ones most often found in floor applications for outdoor living spaces its because they are far better at handling harsh conditions. Tiles made of porcelain are practically a must for outdoor patios in cold weather climates because unlike normal ceramic tiles they are far less likely to crack. Not only can they endure the elements better but the unique absorption rate and density of means that moisture and dirt have a hard time getting through the surface. That means that the tiles look cleaner and retain their color for a longer period of time.
Porcelain tiles may be classified into natural glazed and polished tiles. The natural porcelain tile normally does not undergo any further finish after it is exposed to high temperature. This type of tile may be referred to as unglazed or through body tile where the colour goes all the way through. The glazed tile is coated with liquid glass that allows the manufacturer to put in a variety of designs and play around with colours. It comes out glossy and is one of the easiest to maintain. They are highly recommended as walls or accents in bathrooms and kitchen.