Porcelain Tile / September 14, 2018 / Brousseau
The term porcelain was coined from the Italian word porcellana because of its translucent characteristic similar to the cowrie shell. Porcelain was first developed in China and was exported to Europe between the 17th and 18th century. Beautiful jars and other delicate ornaments were made from porcelain but the discovery of its base material from soft paste to hard past has made porcelain an important industrial commodity. Porcelain is resistant to high temperatures resistant to abrasions and is also non-porous which allows very minimal water absorption. Today porcelain is an important material for insulation and is popularly used for dental prosthesis and veneers. That is why porcelain tiles are excellent choices for residential and commercial finishing.
Ensure that scrap tiles or another similar material is placed under the tile that is being drilled. This will help to halt the progress of the drill once it has finished drilling through the tile. Before drilling tile ensure that you are wearing the correct safety equipment including safety glasses or goggles. Ensure that you are using a residual current device (RCD) to help prevent electric shock. Drilling Small Diameter Holes (10mm or Smaller) with Diamond Cores. Mark the center of the hole to be drilled into the tile by using a marker or a sticky drive pad.
Drilling Small Diameter Holes (10mm or Smaller) with Carbide Bits. Firstly mark where the hole will be drilled on the tile using a marker. Attach a carbide drill bit to your drill. Ensure that there is a constant supply of cold water that is being directly aimed at the selected drill bit i.e. by using water cooling equipment. Note regarding water cooling. It is important to ensure that there is a constant supply of cold water in order to keep the drill bit cool and to help remove any debris that may have built up whilst drilling the tile.