Porcelain Tile / August 30, 2018 / Brousseau
Cheap porcelain tiles can be difficult to properly install. Cheap tiles may look nice on the surface but they may not be able to be cut cleanly with a tile saw and may chip on the edges. Also if the tiles are porous then it will be difficult to clean up the excess grout. Grout haze can become embedded in the tiles and make them look vastly different after they are installed compared to what they looked like before they were installed. Cheap tiles can have quality control issues. Many times people choose their sample tile and then order them.
Unglazed tiles do not have a coated surface and full body porcelain tiles dont show wear anyhow due to the colour and design being throughout the entire tile. These types of tiles have a PEI rating of 0-5 meaning they can be used in any area. PEI classes are 0 through 5. The porcelain enamel institute scale is one that is used to help detect areas that tiles should be used in. The glazed tiles that have the overall 0 to 5 rating can be used anywhere from no foot traffic to industrial traffic making them ideal for use in your home.
Simply start the drill in a vertical position and the sticky pad will ensure that the drill does not slip. Once you have finished drilling the tile simply peel off the sticky drive pad. Because the majority of small diameter holes will be cut into tiles already fixed to the wall it will be necessary to drill a fixing hole behind the tile. Replace the diamond core with the appropriately sized masonry drill bit and set the drill to hammer mode. Use a slow speed for drilling into hard materials to ensure that the tip doesnt overheat. Ensure that the drill bit is frequently withdrawn in order to stop a build up of dust.