Porcelain Tile / August 22, 2018 / Brousseau
Identifying the Size of Hole to be Drilled. The first step is to correctly identify the size of hole to be drilled. This is very important as the diameter of the hole to be cut dictates the method that you will use to drill into the tile. The majority of holes that are 10mm and under in diameter will be drilled with the tile already fixed to the wall. Conversely the majority of holes over 10mm in diameter will be drilled into the tile before the tile has been fixed. When drilling holes that are 13mm or larger in diameter make sure that the tile to be drilled is placed in a tray that will collect the waste water that is produced.
Application of tiles are rated according to the Porcelain Enamel Institute (PEI) rating system from PEI Class 1 up to PEI Class 5. If you are looking for the right tiles to be used for your walls or ceiling the PEI Class 1 is recommended because the tiles are not exposed to any impact. You can choose the PEI Classes 2 and 3 for your bathroom tiles and the PEI Classes 3 to 5 as kitchen and tabletops and as flooring in any part of your home or building according to the impact foot traffic or exposure of the area where you will install your porcelain tiles.
Some of the more common issues that cheap porcelain tiles can have include: Cheap porcelain tiles can actually be extremely porous and difficult to clean. They will absorb all types of dirt spills and contaminates. These types of porous tiles will start to show dirty spots especially in heavy use areas and in the center of the floor where people walk. Soon your floor will look ugly and these types of deeply embedded stains are extremely difficult to clean. Often times it can help to seal these porous tiles but this can be costly and time consuming especially for a product that you thought was dense and would be easy to clean and maintain.