Porcelain Tile / September 14, 2018 / Brousseau
Some of the more common issues that cheap porcelain tiles can have include: Cheap porcelain tiles can actually be extremely porous and difficult to clean. They will absorb all types of dirt spills and contaminates. These types of porous tiles will start to show dirty spots especially in heavy use areas and in the center of the floor where people walk. Soon your floor will look ugly and these types of deeply embedded stains are extremely difficult to clean. Often times it can help to seal these porous tiles but this can be costly and time consuming especially for a product that you thought was dense and would be easy to clean and maintain.
Glazed porcelain can be found through many online retailers for varying costs. Here are a few different types of glazed porcelain that can be used in any area of the home. The Wood Grain Collection made by Takla offers your floors the hard wood appearance with the protection of glazed porcelain. These tiles have a water absorption rate of less than 0.05% and are first grade quality porcelain. The thickness of the average tile of this type is 3/8 inch and the finish is matter and slightly embossed to have the appearance of wood grain. The PEI rating for these tiles is 4 and they are considered a green building material.
The Armeg PTC Carbide drill bit range comprises of excellent porcelain tile drill bits that are capable of cutting 15-25 holes in grade 5 porcelain or 50+ in lesser grades of porcelain. These carbide drill bits boast non-slip start-up thanks to diamond-ground tip geometry. The Armeg PTC Soft Tile drill bit range is ideal for drilling softer tiles such as ceramics and travertine. They feature point-ground tips to help reduce slippage and wander. Armeg Tile Drilling Accessories for use with Armeg PTC drill bits include: water feed pump kit water feed adapters water feed clamp & drive/piloting guides to ensure non-slip start-up with small diameter diamond cores.