Porcelain Tile / September 14, 2018 / Brousseau
With porcelain being one of the most popular choices of tile material available and with the trend for porcelain tile set to continue tilers have had to adapt their working methods and tools to be able to cater for the demands of their clients. Until recently a large number of tile fixers have shied away from the installation and drilling of porcelain tiles due its perceived difficulty. However drilling holes in porcelain tile is not difficult! Using the correct methods and the best tools for the job it is possible to achieve perfect cuts in a matter of seconds.
Drilling Large Diameter Holes (13mm or Larger). In order to cut holes that are 13mm or larger in diameter it is necessary to first drill a pilot hole. The pilot hole will act as a locater for a large diamond core and will help you to drill a perfect hole in porcelain tile. Attach an 8mm carbide drill bit or 8mm diamond bit to your drill. Follow the instructions given above for either Drilling Small Diameter Holes (10mm or Smaller) with Diamond Cores or Drilling Small Diameter Holes (10mm or Smaller) with Carbide Bits depending on whether you are using diamond cores or carbide drill bits. Leave out the final step in either case as you wont be drilling a fixing hole behind the tile.
The term porcelain was coined from the Italian word porcellana because of its translucent characteristic similar to the cowrie shell. Porcelain was first developed in China and was exported to Europe between the 17th and 18th century. Beautiful jars and other delicate ornaments were made from porcelain but the discovery of its base material from soft paste to hard past has made porcelain an important industrial commodity. Porcelain is resistant to high temperatures resistant to abrasions and is also non-porous which allows very minimal water absorption. Today porcelain is an important material for insulation and is popularly used for dental prosthesis and veneers. That is why porcelain tiles are excellent choices for residential and commercial finishing.