Porcelain Tile / September 14, 2018 / Brousseau
Now that the pilot hole has been cut it is possible to drill the main (large) hole. Attach the appropriate diamond core and ensure that there is a constant supply of cold water (see water cooling information in the previous sections of this article). Diamond cores that are larger than 13mm will require an adapter with pilot pin that locates into the pilot hole that has been cut previously to ensure the perfect hole will be made. Starting the drill vertically begin to drill in a circular motion with sufficient pressure until the tone of the drill changes.
Application of tiles are rated according to the Porcelain Enamel Institute (PEI) rating system from PEI Class 1 up to PEI Class 5. If you are looking for the right tiles to be used for your walls or ceiling the PEI Class 1 is recommended because the tiles are not exposed to any impact. You can choose the PEI Classes 2 and 3 for your bathroom tiles and the PEI Classes 3 to 5 as kitchen and tabletops and as flooring in any part of your home or building according to the impact foot traffic or exposure of the area where you will install your porcelain tiles.
There was a time in the past when porcelain was synonymous with decorative pieces such as vases chinaware figurines and the like. The misconception that porcelain was fragile or delicate was common. However the many uses of porcelain have grown through time and it continues to be a valuable material in the dental profession for dental prosthesis and dental veneers. Today porcelain is a major industrial material used in insulation because porcelain is highly resistant to heat resistant to abrasion and is non-porous. That is why porcelain makes excellent floor tiles for both residential and commercial use.