Porcelain Tile / September 14, 2018 / Brousseau
The Porcelain Enamel Institute (PEI) rating system is also a good reference when buying your porcelain tiles. In the rating system the tiles are measured according to their application. The range starts from PEI Class 1 up to PEI Class 5. When looking for the perfect porcelain tile designs for your home you can choose from a variety of designs that are glazed unglazed or through-bodied in color composition. Whatever your preference porcelain tiles are guaranteed to make your home cozy and beautiful.
How to lean in... To lean in simply start the drill at an angle as soon as the drill bit has started to cut the tile slowly bring the drill into a vertical position. Ensure that sufficient pressure is being applied (tile dust should be evident in cooling water) and rotate slowly until you have cut the perfect hole. As you finish the hole you will notice that the tone of the drill will change. Using sticky drive pads. If you use a sticky drive pad it is unnecessary to use the leaning in method.
Porcelain tile and ceramic tile both start off the same being composed of more or less the same materials such as clay and quartz. After formation they are both fired to high temperatures. What spells out the difference between the ceramic white tile and porcelain tile is that the latter uses a more highly refined and purified clay making the porcelain tile denser than the other tile. This is an extremely important difference since being more dense means that porcelain tile absorbs far less moisture making it both durable and stain resistant.