Porcelain Tile / September 14, 2018 / Brousseau
You can never go wrong when you choose ceramic porcelain tiles for your home finishing. They are not only durable and practical porcelain tiles can transform an otherwise ordinary home into a lovely abode. Fabric cross-stitch patterns work very well in the home or office decors! The light and the shadow beside the 3D patterns are breathtaking. Otherwise, fabric often faces problems like dirt and may be difficult to maintain clean.
Identifying the Size of Hole to be Drilled. The first step is to correctly identify the size of hole to be drilled. This is very important as the diameter of the hole to be cut dictates the method that you will use to drill into the tile. The majority of holes that are 10mm and under in diameter will be drilled with the tile already fixed to the wall. Conversely the majority of holes over 10mm in diameter will be drilled into the tile before the tile has been fixed. When drilling holes that are 13mm or larger in diameter make sure that the tile to be drilled is placed in a tray that will collect the waste water that is produced.
Now that the pilot hole has been cut it is possible to drill the main (large) hole. Attach the appropriate diamond core and ensure that there is a constant supply of cold water (see water cooling information in the previous sections of this article). Diamond cores that are larger than 13mm will require an adapter with pilot pin that locates into the pilot hole that has been cut previously to ensure the perfect hole will be made. Starting the drill vertically begin to drill in a circular motion with sufficient pressure until the tone of the drill changes.