Porcelain Tile / September 14, 2018 / Brousseau
Simply start the drill in a vertical position and the sticky pad will ensure that the drill does not slip. Once you have finished drilling the tile simply peel off the sticky drive pad. Because the majority of small diameter holes will be cut into tiles already fixed to the wall it will be necessary to drill a fixing hole behind the tile. Replace the diamond core with the appropriately sized masonry drill bit and set the drill to hammer mode. Use a slow speed for drilling into hard materials to ensure that the tip doesnt overheat. Ensure that the drill bit is frequently withdrawn in order to stop a build up of dust.
There are some types of porcelain tiles that are quality made and do have characteristics that are vastly superior to ceramic tiles. You should always only shop for quality name brand tiles at quality tile shops to ensure that you are truly getting a quality product. Ask many questions at the tile store and ask to see as many samples as possible before you actually purchase them. Remember that many times you will be paying a premium for porcelain as opposed to just normal ceramic tiles. In many cases especially with indoor tile installations ceramic tiles will perform just as well at a much lower price.
To choose the right tiles that would best fit your needs it is important not to get lost with such terms as ceramic tiles non-porcelain or ceramic porcelain. All of these terms refer to a kind of ceramic ware however they differ in characteristics application and production method. Ceramic tiles are usually referred to as non-porcelain tiles and they are easier to cut and have higher water absorption as compared to porcelain. Unlike porcelain tiles ceramic tiles cannot absorb heavy impact or heavy foot traffic as they have a tendency to chip and abrade.