Porcelain Tile / September 10, 2018 / Brousseau.
Attach the appropriate diamond core bit to the electric drill and ensure that there is a constant supply of cold water that is being directly aimed at the diamond core i.e. by using water cooling equipment. Note regarding water cooling. It is important to ensure that there is a constant supply of cold water directed at the drill bit in order to keep the diamond core cool and to help remove any debris that may have built up whilst drilling the tile. It is not advisable to try and cool the diamond drill bit by using a hand held aspirator or drilling through a wet sponge.
Now that the pilot hole has been cut it is possible to drill the main (large) hole. Attach the appropriate diamond core and ensure that there is a constant supply of cold water (see water cooling information in the previous sections of this article). Diamond cores that are larger than 13mm will require an adapter with pilot pin that locates into the pilot hole that has been cut previously to ensure the perfect hole will be made. Starting the drill vertically begin to drill in a circular motion with sufficient pressure until the tone of the drill changes.
When it comes to deciding which tile to use in your home most people waver between choosing porcelain tile or a ceramic white tile. Certainly both have great qualities bringing beauty and charm into the space you are living in. Good quality tile adds an elegant tastefulness to a room as well as providing flooring that can stand up to more use than wood or carpet. This is why its so important to make sure youre choosing the right kind of tile. Everyone loves the clean bright look of white tile so its little wonder that people wonder if they should use ceramic or porcelain tile. A lot of DIY tile installers ask the difference between the two and the answer is surprising. Despite a superficial similarity differences abound between the two types of tile.
With porcelain being one of the most popular choices of tile material available and with the trend for porcelain tile set to continue tilers have had to adapt their working methods and tools to be able to cater for the demands of their clients. Until recently a large number of tile fixers have shied away from the installation and drilling of porcelain tiles due its perceived difficulty. However drilling holes in porcelain tile is not difficult! Using the correct methods and the best tools for the job it is possible to achieve perfect cuts in a matter of seconds.