Porcelain Tile / September 14, 2018 / Brousseau
For the easiest to clean and maintain floors ceramic and porcelain tiles seem to make the most sense. In theory the specifications regarding porcelain tiles make them vastly superior to ceramic tile. The specifications state that porcelain tiles are harder and more scratch resistant than ceramic. Porcelain is supposed to be denser and less porous then ceramic. Many people like the idea that some porcelain tiles are through body where the entire porcelain tile is the exact same color and texture as the surface.
To choose the right tiles that would best fit your needs it is important not to get lost with such terms as ceramic tiles non-porcelain or ceramic porcelain. All of these terms refer to a kind of ceramic ware however they differ in characteristics application and production method. Ceramic tiles are usually referred to as non-porcelain tiles and they are easier to cut and have higher water absorption as compared to porcelain. Unlike porcelain tiles ceramic tiles cannot absorb heavy impact or heavy foot traffic as they have a tendency to chip and abrade.
Because the majority of small diameter holes will be cut into tiles already fixed to the wall it will be necessary to drill a fixing hole behind the tile. Replace the carbide drill bit with the appropriately sized masonry drill bit and set the drill to hammer mode. Use a slow speed for drilling into hard materials to ensure that the tip doesnt overheat. Ensure that the drill bit is frequently withdrawn in order to stop a build up of dust.