Porcelain Tile / September 14, 2018 / Brousseau
The hardness of porcelain tiles is an advantage for more reasons than appearance. This quality makes these tiles far more scratch resistant than ceramic tiles. When tiles get scratched up you have to go to a lot of expense and trouble to get them polished out and sometimes even that isnt possible. Porcelain tiles are also more resistant to chipping. This hardy nature also makes them less slippery than ceramic tiles which makes them a better choice for safety reasons as well.
There was a time in the past when porcelain was synonymous with decorative pieces such as vases chinaware figurines and the like. The misconception that porcelain was fragile or delicate was common. However the many uses of porcelain have grown through time and it continues to be a valuable material in the dental profession for dental prosthesis and dental veneers. Today porcelain is a major industrial material used in insulation because porcelain is highly resistant to heat resistant to abrasion and is non-porous. That is why porcelain makes excellent floor tiles for both residential and commercial use.
Identifying the Size of Hole to be Drilled. The first step is to correctly identify the size of hole to be drilled. This is very important as the diameter of the hole to be cut dictates the method that you will use to drill into the tile. The majority of holes that are 10mm and under in diameter will be drilled with the tile already fixed to the wall. Conversely the majority of holes over 10mm in diameter will be drilled into the tile before the tile has been fixed. When drilling holes that are 13mm or larger in diameter make sure that the tile to be drilled is placed in a tray that will collect the waste water that is produced.