Porcelain Tile / September 14, 2018 / Brousseau
Because the majority of small diameter holes will be cut into tiles already fixed to the wall it will be necessary to drill a fixing hole behind the tile. Replace the carbide drill bit with the appropriately sized masonry drill bit and set the drill to hammer mode. Use a slow speed for drilling into hard materials to ensure that the tip doesnt overheat. Ensure that the drill bit is frequently withdrawn in order to stop a build up of dust.
There are some types of porcelain tiles that are quality made and do have characteristics that are vastly superior to ceramic tiles. You should always only shop for quality name brand tiles at quality tile shops to ensure that you are truly getting a quality product. Ask many questions at the tile store and ask to see as many samples as possible before you actually purchase them. Remember that many times you will be paying a premium for porcelain as opposed to just normal ceramic tiles. In many cases especially with indoor tile installations ceramic tiles will perform just as well at a much lower price.
Identifying the Size of Hole to be Drilled. The first step is to correctly identify the size of hole to be drilled. This is very important as the diameter of the hole to be cut dictates the method that you will use to drill into the tile. The majority of holes that are 10mm and under in diameter will be drilled with the tile already fixed to the wall. Conversely the majority of holes over 10mm in diameter will be drilled into the tile before the tile has been fixed. When drilling holes that are 13mm or larger in diameter make sure that the tile to be drilled is placed in a tray that will collect the waste water that is produced.